Prepare Your Backup Connection With the Reach You Need

The SucceBuy 30 amp generator cord kit brings a heavy-duty cord and matching power inlet box together for a more organized backup-power setup. Choose 10 ft or 15 ft of reach, connect through matching NEMA L14-30 fittings, and keep the cord neatly gathered with the included carrying strap and storage bag.

Key Benefits

• 10 ft or 15 ft cord options — Choose the routing length that suits your compatible generator and inlet arrangement.
• Matching L14-30 connections — Pair the L14-30P male plug, L14-30R female connector and L14-30P inlet box in one coordinated kit.
• 10 AWG, four-conductor copper cable — Bring SJTW cord construction and a flexible PVC jacket to your 30A power connection.
• Covered inlet with LED indicator — Close the flip cover between uses and check the power indication at a glance.
• Pre-drilled enclosure and removable entry plugs — Give your installer practical cable-entry access and room for wiring.
• Storage bag and carrying strap — Keep the cord organized and ready for the next use.

Build a backup-power connection around practical details: a dedicated installed inlet, a cord length chosen for your layout, and accessories that make packing up easier. The compact grey inlet box has a protective flip cover and corrosion-resistant finish, while the black cable coils for storage at home or in a compatible RV setup.

What's Included

Your selected 10 ft or 15 ft generator cord, L14-30P inlet box, non-woven storage bag, PVC carrying strap, three expansion screw kits, two knockout plugs and user manual are included. The kit is specified for 30A, 125/250V equipment, with a maximum rated power of 7,500W at 250V, subject to the lowest applicable generator, circuit, cord and connector rating.

Frequently Asked Questions

Which cord lengths can I choose?

Choose the 10 ft or 15 ft kit using the Cord Length selector. Both lengths include the matching inlet box, carrying strap and storage bag.

What connectors does this 30 amp generator cord kit use?

The cord has a NEMA L14-30P male plug and L14-30R female connector. The inlet box has an L14-30P inlet for the matching cord end. Use equipment with the specified connector configuration and electrical rating.

What is the cord made from?

The cord uses a copper core with 10 AWG, four-conductor SJTW construction and a flame-retardant PVC jacket. Its specified operating-temperature range is -4°F to 140°F.

Does the inlet box show when power is on?

Yes. The inlet box includes an LED power indicator, positioned beside the flip cover for visibility in low light. Follow the user manual and use appropriate electrical testing during installation and servicing.

How is the kit installed for home generator backup?

Have a qualified electrician install the inlet with an approved transfer switch or compatible interlock that isolates utility power. Position the generator outdoors, away from doors, windows and vents, follow the generator's required clearances, and keep electrical connections clear of standing water.

SPECIFICATIONS

Brand Name: NONE

High-concerned chemical: none

Origin: Mainland China

Kit Details

• Cord construction: SJTW 10 AWG/4C, copper conductors, PVC jacket.
• Electrical rating: 30A, 125/250V; up to 7,500W at 250V within all connected equipment ratings.
• Cord lengths: 10 ft or 15 ft, including plug and receptacle.
• Inlet box dimensions: approximately 5.98 × 3.86 × 3.15 inches.
• Pre-drilled cable-entry opening: approximately 1.06 inches.
• Specified operating-temperature range: -4°F to 140°F.
• Net kit weight: 10 ft option, 5.51 lbs; 15 ft option, 6.83 lbs.