48V 60Ah High-Capacity LiFePO4 Battery — Deep Cycle for E-Bike, Solar & Off-Grid Systems

48 Volts. 60 Amp-Hours. Built to Last.

A 48V 60Ah LiFePO4 battery delivers 2880Wh of energy storage in a format that’s compatible with 48V e-bike systems, solar installations, and off-grid power setups. The LiFePO4 chemistry means you’re getting thousands of charge cycles from a battery that stays safe, stays cool, and holds its capacity far longer than lead-acid or standard lithium-ion alternatives.

Features

• 48V 60Ah capacity — 2880Wh of total energy storage; approximately 2736Wh usable at 95% depth of discharge
• LiFePO4 chemistry — 2000–5000+ charge cycles; no thermal runaway risk; superior safety and longevity
• Built-in BMS — protects against overcharge, over-discharge, over-temperature, short circuit, and cell imbalance
• High discharge rate — supports the high current demands of 48V e-bike motors and inverters
• Lightweight vs. lead-acid — significantly lighter than an equivalent 48V lead-acid battery bank
• Compatible connector — check variant for output connector type and compatibility with your system
• Charging port — standard 48V charging port for use with a compatible LiFePO4 charger
• LED or display indicator — shows remaining charge level

Who It’s For

• E-bike riders who need a high-capacity 48V battery for extended range
• Solar system builders using 48V battery banks for off-grid storage
• Golf cart and electric vehicle owners who need a 48V replacement battery
• Off-grid cabin owners running 48V inverter systems

How to Use

1. Verify compatibility with your system’s voltage (48V), connector type, and current requirements before purchase.
2. Connect to a 48V LiFePO4-compatible charger for charging — do not use a lead-acid charger.
3. Connect to your e-bike controller, inverter, or solar charge controller via the output connector.
4. Monitor state of charge via the LED or display indicator.
5. Store at 50–80% charge for long-term storage; recharge every 3–6 months.

Frequently Asked Questions

Is it compatible with my 48V e-bike?
Check your e-bike’s battery connector type, maximum charge current, and BMS compatibility. Most 48V e-bikes are compatible with 48V LiFePO4 batteries, but connector types vary — verify before purchase.

What charger do I need?
Use a 48V LiFePO4 charger (54.6V max charge voltage). Do not use a lead-acid charger — it will not fully charge the battery and may reduce its lifespan.

How much range will I get on my e-bike?
Range depends on motor wattage, rider weight, terrain, and assist level. A 48V 60Ah battery (2880Wh) with a 500W motor provides approximately 40–80 miles of range under typical conditions.